canonMP145打印機出故障是E42怎么辦

canonMP145 故障維修手冊，錯誤代碼和清零方法 Error Code :錯誤代碼）E2-2 = No paper ASFE3-3 = Paper jamE4 = No ink（沒有墨水）E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed or the ink cartridges are not installed properly（墨盒未正確安裝，或不支持的墨盒安裝）E8 = Waste ink absorber full or platen waste ink absorber full（廢墨水吸收器已滿，或壓板浪費墨水充分吸收，清0即可）E9 = The connected digital camera / video camera does not support Camera Direct Printing（連接數位相機/攝影機不支持相機直接打印）E14 = The Ink cartridges whose destination are wrong（墨盒，其目的地是錯誤的）E15 = Ink cartridge is not installed E16 - Ink remaining is unknownE16 -E19 = Failed to scan head alignment sheetE22 = Carriage errorE23 = Paper feed errorE24 = Purge unit errorE25 = ASFcam sensor error（凸輪傳感器錯誤）E26 = Internal temperature rise error（內部溫度上升錯誤）E27 = Waste ink absorber full or platen waste ink absorber fullE28 = Ink cartridge temperature rise error -E29 = EEPROM errorE33 = Paper feed position errorE35 15 = USB Host VBUD overcurrent error - USB（USB主機VBUD過錯誤- USB接口）E37 17 = Abnormal motor driver errorE40 20 = Other hardware errorE42 22 = Scanner error（掃描錯誤）